Graceful Controller

Source code on Github.

The graceful controller implements a controller based on the works of Jong Jin Park and Benjamin Kuipers in “A Smooth Control Law for Graceful Motion of Differential Wheeled Mobile Robots in 2D Environment” (ICRA 2011). In this implementation, a motion_target is set at a distance away from the robot that is exponentially stable to generate a smooth trajectory for the robot to follow.

See the package’s README for more complete information.

Graceful Controller Parameters

transform_tolerance:

Type	Default
double	0.1

Description: The TF transform tolerance (s).

motion_target_dist:

Type	Default
double	0.6

Description: The lookahead distance (m) to use to find the motion_target point.

max_robot_pose_search_dist:

Type	Default
double	Local costmap max extent (max(width, height) / 2)

Description: Upper bound on integrated distance along the global plan to search for the closest pose to the robot pose. This should be left as the default unless there are paths with loops and intersections that do not leave the local costmap, in which case making this value smaller is necessary to prevent shortcutting. If set to -1, it will use the maximum distance possible to search every point on the path for the nearest path point.

k_phi:

Type	Default
double	3.0

Description: Ratio of the rate of change in phi to the rate of change in r. Controls the convergence of the slow subsystem. If this value is equal to zero, the controller will behave as a pure waypoint follower. A high value offers extreme scenario of pose-following where theta is reduced much faster than r.

k_delta:

Type	Default
double	2.0

Description: Constant factor applied to the heading error feedback. Controls the convergence of the fast subsystem. The bigger the value, the robot converge faster to the reference heading.

beta:

Type	Default
double	0.2

Description: Constant factor applied to the path curvature. This value must be positive. Determines how fast the velocity drops when the curvature increases.

lambda:

Type	Default
double	2.0

Description: Constant factor applied to the path curvature. This value must be greater or equal to 1. Determines the sharpness of the curve: higher lambda implies sharper curves.

v_linear_min:

Type	Default
double	0.1

Description: Minimum linear velocity (m/s).

v_linear_max:

Type	Default
double	0.5

Description: Maximum linear velocity (m/s).

v_angular_max:

Type	Default
double	1.0

Description: Maximum angular velocity (rad/s) produced by the control law.

slowdown_radius:

Type	Default
double	1.5

Description: Radius (m) around the goal pose in which the robot will start to slow down.

initial_rotation:

Type	Default
bool	true

Description: Enable a rotation in place to the goal before starting the path. The control law may generate large sweeping arcs to the goal pose, depending on the initial robot orientation and k_phi, k_delta.

initial_rotation_min_angle:

Type	Default
double	0.75

Description: The difference in the path orientation and the starting robot orientation to trigger a rotate in place, if initial_rotation is enabled.

final_rotation:

Type	Default
bool	true

Description: Similar to initial_rotation, the control law can generate large arcs when the goal orientation is not aligned with the path. If this is enabled, the final pose will be ignored and the robot will follow the orientation of he path and will make a final rotation in place to the goal orientation.

rotation_scaling_factor:

Type	Default
double	0.5

Description: The scaling factor applied to the rotation in place velocity.

allow_backward:

Type	Default
bool	false

Description: Whether to allow the robot to move backward.

Example

controller_server:
  ros__parameters:
    use_sim_time: True
    controller_frequency: 20.0
    min_x_velocity_threshold: 0.001
    min_y_velocity_threshold: 0.5
    min_theta_velocity_threshold: 0.001
    progress_checker_plugins: ["progress_checker"] # progress_checker_plugin: "progress_checker" For Humble and older
    goal_checker_plugins: ["goal_checker"]
    controller_plugins: ["FollowPath"]

    progress_checker:
      plugin: "nav2_controller::SimpleProgressChecker"
      required_movement_radius: 0.5
      movement_time_allowance: 10.0
    goal_checker:
      plugin: "nav2_controller::SimpleGoalChecker"
      xy_goal_tolerance: 0.25
      yaw_goal_tolerance: 0.25
      stateful: True
    FollowPath:
      plugin: nav2_graceful_controller::GracefulController
      transform_tolerance: 0.1
      motion_target_dist: 0.6
      initial_rotation: true
      initial_rotation_min_angle: 0.75
      final_rotation: true
      allow_backward: false
      k_phi: 3.0
      k_delta: 2.0
      beta: 0.4
      lambda: 2.0
      v_linear_min: 0.1
      v_linear_max: 1.0
      v_angular_max: 5.0
      slowdown_radius: 1.5